Simoco SRM9030 Manuale Utente Scaricare il pdf (Pagina 33)

Although a much easier solution, the previous example was still

complicated by the fact that the diplexer needs to be present to

keep the frequencies in each radio, apart.

If a cross band system is used where the rebroadcast link from the vehicle to the base

is on a different band, the old low band channels being the most obvious for experi-

mentation, then no diplexer is needed and the system is very much simpler to setup.

In the example shown on the next page, a button on the control head has been pro-

grammed for and Auxiliary output on Pin 8 of the power connector. This method can

easily be replaced by the dash-mounted switch shown in the previous example but as

there is no diplexer relay to also be operated, only one button needs to be pro-

grammed to switch the system on and off so this is probably the more elegant solution

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 82 83

Zion Ernest 12 Oct 2024 | 04:24:45

Manual and program

Simoco SRM9030 Manuale Utente Pagina 33